Building Construction MCQs with Answers & Solutions

King closers are related toMasonry Construction

Match List-I with List-II and select the correct answer using the codes given below the list List-I List-II a. Derick 1. Stone masonry work b.…Construction Equipment and Tools

Consider the following statements regarding Cavity Walls 1. The primary purpose of a cavity wall is to prevent dampness from the outer face reaching…Masonry Construction

3D Concrete Printing (3DCP) is gaining popularity in the construction industry primarily, because it3D Concrete Printing

Which of the following is a primary advantage of using Precast and Prefabricating technology in construction?Precast Concrete Technology

Reinforced Brickwork is used in construction primarily toMasonry Construction

Regarding Formwork for concrete, which of the following represents the correct sequence for the removal of formwork?Formwork

In Staircase Design, the horizontal part of a step where the foot is placed is called the _______ and the vertical distance between two steps is the…Staircase Design

In "Functional Planning of Buildings", the principle of 'Prospect' refers toPrinciples of Building Planning

Low-Cost Housing strategies often emphasize the use ofLow-Cost Housing

Assertion (A): Plastering is used to provide a smooth, hard and decorative finish to the rough surface of the wall. Reason (R): Plastering also acts…Plastering and Pointing

Consider the following statements regarding plumbing systems 1. Trap seals in plumbing systems prevent sewer gases from entering buildings. 2. Vent…Plumbing Systems

The event in rock tunnelling are given below 1. Making tunnel profile 2. Loading explosive and blasting 3. Checking misfire 4. Mucking 5. Removing fouTunnel Construction

Which of the following advantages are correct regarding poly-centric shape tunnel? 1. It can be conveniently used for road and railway traffic 2. The…Tunnel Construction

Dust control during the drilling and mucking phases in a tunnel is essential primarily toTunnel Construction

When disposing of muck in a very long tunnel with a small diameter, which transportation system is usually the most efficient?Tunnel Construction

For effective drainage in a tunnel, it is generally preferred to provideTunnel Construction

As per IS 875 (Part 2), for the design of a residential building, the imposed load on the floors of dwelling units is generally taken asDesign Loads

In the Drill and Blast method of tunnel construction, the term 'Mucking' refers toTunnel Construction

In the context of earthquake-resistant masonry features, Horizontal Bands are provided primarily toEarthquake Resistant Construction

In bridge maintenance, the process of injecting cement grout or chemicals into cracks in concrete to restore structural integrity is known asConcrete Repair and Maintenance

Pick up the incorrect statement from the following.Roof Trusses

Traps are used in household drainage system toPlumbing Systems

The structural element that provides lateral support to a staircase is known asStaircase Design

In functional planning, the concept of zoning is primarily used toPrinciples of Building Planning

The ‘Aranya Low-Cost Housing Project’ in India is internationally recognized forLow-Cost Housing

Which one of the following statements related to IS 875 (Part 3) – 1987 is not correct ?Design Loads

As per IS 875 (Part 2) – 1987, what is the reduction in total distributed imposed load (in percent) for design of supporting structural elements in a…Design Loads

As per IS 875 (Part 2) – 1987, what is the minimum imposed load that needs to be considered for living rooms ?Design Loads

What is the typical unit weight of brick masonry used by designers ?Design Loads

Match the following lists : List-I: P. Cut and Cover Q. Shield Driven R. Sequential Excavation List-II: 1. Circular Tunnel 2. Horseshoe Tunnel 3.…Tunnel Construction

It is proposed to design an industrial building 12 m high for a 50-year life. The building size is in the range 20 m to 50 m, the topography of the…Design Loads

A steel chimney 3 m in diameter is situated in a region where the intensity of uniform wind pressure is 1200 N/m². If the shape factor is 0·7 and the…Design Loads

The stone masonry construction is superior to brick masonry construction under which of the following circumstances? 1. Stone masonry construction…Masonry Construction

Consider the following statements : The wall thickness depends upon 1. the anticipated load to come on the wall 2. the quality of wall material 3.…Masonry Construction

_______ are stones, concrete, bricks etc. placed on top of parapet walls to prevent seepage of water into the wallsMasonry Construction

In brickwork if the elevation consists of alternate courses of all headers and all stretchers then this type of bond is called asMasonry Construction

A systematic approach for maintenance is:Concrete Repair and Maintenance

Removal of props under slabs spanning up to 4.5 m isFormwork

A _______ is a set of rules that specify the standards for constructed objects such as buildings and non-building structures.Principles of Building Planning

Combining two or more plots as a single plot is called _______Principles of Building Planning

3D printing technology in concrete construction primarily involves3D Concrete Printing

Which standard is followed for electrical wiring installations in buildings?Plumbing Systems

Which of the following is a commonly used refrigerant in Heat Ventilation and Air Conditioning (HVAC) systems?Principles of Building Planning

What does the "R" in the fire rating of building materials represent?Earthquake Resistant Construction

The cost of formwork is generally expressed as a percentage ofFormwork

In hot and dry climates, how should a building be oriented?Principles of Building Planning

In low-cost housing, what is the benefit of rat-trap bond masonry?Low-Cost Housing

What type of bond is typically used for walls of half-brick thickness?Masonry Construction

What device is used to protect against leakage current and prevent electric shocks?Plumbing Systems