Exams Subjects Test Series PYQ Free MCQs

Log in Register

Exams Subjects Test Series PYQ Free MCQs Register free

Loading…

Civil Engineering MCQ practice, mock tests and performance analysis for SSC JE, RRB JE, GATE, ESE and State AE/JE exams.

Exams

SSC JE Civil
RRB JE Civil
GATE Civil
UPSC ESE Civil
GPSC AE Civil

Practice

Free MCQs with answers
Civil subjects
SSC JE previous year papers
All previous year papers
Test series
Free tests

Civexa

About
Contact
Terms of Use
Privacy Policy
Refund Policy
Create free account

© 2026 Civexa. Questions are original or used with permission; official papers are credited to their exam bodies.

Transportation Engineering MCQs with Answers & Solutions — Page 4 | Civexa

Subjects / Transportation Engineering / MCQs

Free questions

Transportation Engineering MCQs with answers

296 free questions — page 4 of 6. Open one to see the correct answer and the full solution.

Pedestrians can cross the road ——————Traffic Engineering
For a design speed of 40 kmph the recommended value of weaving length isTraffic Engineering
What does the following road sign indicate? (see figure)Traffic Engineering
A vertical curve is designed on the basis of theGeometric Design
Which of the following is used while selecting an alignment for railway line?Railway Engineering
Design of horizontal and vertical alignments, super elevation, sight distance and grades, is worst affected byGeometric Design
In which method of traffic volume counts, Pneumatic tube is used?Traffic Engineering
For highway geometric design purposes the speed used isGeometric Design
Modes of transportation are typically evaluated on the basis of all of the following criteria exceptTransportation Planning
Which of the following statements is/are correct as regards to the main features of Roman roads? i. The soft soil was excavated and removed till hard…Road Alignment Principles
Which of the following features are correct as per ‘National Highway Act 1956’? i. To enter into any land for carrying out surveys ii. To declare…Transportation Planning
The order of stages of conducting an engineering survey for highway alignment is i. Preliminary Survey ii. Reconnaissance Survey iii. Final Location…Road Alignment Principles
For a given road, the estimated safe stopping sight distance is 95 m and the overtaking sight distance is 420 m. What is the intermediate sight…Sight Distance
What would be the extra widening required for a pavement of width 7 m on a horizontal curve of radius 180 m? The wheel base of the vehicle is 6 m and…Geometric Design
The correct relationship between Average Daily Traffic (ADT), Traffic Volume Count, Daily Factor (DF), Seasonal Factor (SF) isTraffic Engineering
Which of the following Origin and Destination survey method is preferred when comprehensive traffic and transportation requirements are to be planned…Transportation Planning
The free mean speed of a road is 70 kmph. At jam conditions, the average spacing between the vehicles is 6.5 m. What is the maximum flow in…Traffic Flow Characteristics
A California Bearing Ratio (CBR) test was performed on a soil subgrade and it is observed that the load value for 2.5 mm penetration is 60 kg and for…Highway Materials
The shape of the STOP sign according to IRC 67-2001 isTraffic Engineering
Which of the following statements is/are true? i. Wraping stresses in cement concrete pavements are due to daily variation of temperatures ii. Tie…Pavement Design
Well-designed signalized intersection is the one in which i. total delay is minimized ii. cycle time is equal to the sum of red and green times in…Traffic Signal Design
What type of transport system is the Ahmedabad Metro?Railway Engineering
The Ro-Ro ferry service launch in Gujarat connects which two locations?Transportation Planning
What is the intensity of pressure on piers parallel to the direction of the water current, if velocity of the current is 2.5 m/s and the value of the…Bridge Engineering
What is the live load of the railway foot-bridge if the effective span of railway bridge is 40 m. Assume width of the foot-way to be 500 mm.Bridge Engineering
What is the overtaking time if the speed of overtaking and overtaken vehicles are 72.5 and 31.5 km/h respectively? Assume average acceleration rate…Sight Distance
What is the safe overtaking sight distance on a one-way traffic road if the speed of overtaking and overtaken vehicles are 90 and 73 km/h…Sight Distance
The radius of a horizontal circular curve is 140 m. The design speed is 60 km/h and the coefficient of lateral friction is 0.15. What is the…Geometric Design
The radius of a horizontal circular curve is 120 m and the design speed is 50 km/h. What is the coefficient of friction needed if no superelevation…Geometric Design
On a horizontal curve, if maximum superelevation of 0.064 and maximum lateral friction of 0.14 can be achieved, then what is the maximum allowable…Geometric Design
If superelevation of 0.064 is adopted at a horizontal curve and width of the pavement at the curve is 7.5 m, then by how much should the outer edges…Geometric Design
What is the extra widening required for pavement of width 7.0 m on a horizontal curve of radius 196 m if the longest wheel base of vehicle expected…Geometric Design
What is the mechanical widening required for a pavement of width 14.0 m on a horizontal curve of radius 200 m if the longest wheel base of vehicle…Geometric Design
What is the length of transition curve from the viewpoint of allowable rate of centrifugal acceleration if the design speed is 65 km/h and the radius…Geometric Design
What is the length of transition curve from the viewpoint of rate of introduction of superelevation which is 1 in 150? Total pavement width at the…Geometric Design
In which case meeting of two grades results in a vertical curve classified as a summit curve?Geometric Design
An ascending gradient of 1 in 100 meets a descending gradient of 1 in 120. What should be the length of the vertical curve given the design speed of…Sight Distance
A valley curve is formed by a descending grade of 1 in 25 meeting an ascending grade of 1 in 30. What should be the length of the curve from the…Sight Distance
If traffic flow rate at a section of a road is 920 veh/h and the traffic speed is 12.5 m/s, then what is the traffic density?Traffic Flow Characteristics
The monthly average daily traffic for the month of July is 8900 and the seasonal factor for the month of July is 0.857. What is the monthly average…Traffic Engineering
Following spot speed data were collected on a section of a road: 56 km/h, 68 km/h, 49 km/h, 58 km/h, 52 km/h, 66 km/h and 62 km/h. What is the…Traffic Engineering
Calculate the stopping sight distance on a highway at a descending gradient of 3% for a design speed of 90 km/h. Assume reaction time and coefficient…Sight Distance
What is the coefficient of friction due to developed transverse skidding if the maximum allowable rate of superelevation is provided on a horizontal…Geometric Design
It is given that the safe stopping sight distance is 128 m. What should be the length of the vertical curve if it is formed due to meeting of two…Sight Distance
The considerable change in the suspended cable with change in the position of moving loads is prevented by usingBridge Engineering
_______ are the end supports to superstructure of bridge which retain earths on their back side which serves as an approach to the bridge.Bridge Engineering
Cable stayed bridges are generally preferred for bridges in the span range of _______Bridge Engineering
Bridges planned in coastal areas should be designed specifically to resist the effect of _______Bridge Engineering
As per IRC, which type of bridge loading is to be adopted within the Municipal Limits?Bridge Engineering
The first loading standard in India was published by the IRC in the year _______Bridge Engineering

← Previous4 / 6Next →